changes.
2. Disclaimer.
3. Copyright notice. Software build number.
4. Cruise Speed and Wind planned. Note: Cruise Speed
Standard = Mach 0.65
5. -1000 fuel burn and -4000 fuel burn (start up to touch
down).
6. Aircraft Type.
7. Sector Route.
8. Via waypoint.
9. Flight Number.
10. Scheduled local departure time/arrival time. If the
flight has been rescheduled or it is a special flight not listed on the
current schedule, 'Sched:' will be replaced with 'Resched:'.
11. Standard Departure Clearance.
12. MSA circle for departure airport. Airport navaid
printed inside circle. Sectors specified by radials.
13. Special Take Off Procedures for departure airport. As
per IRTOC.
14. Highest AMA within 25 nm of the waypoint listed.
15. Enroute navaids.
16. Morse Code.
17. Total Distance and Total Time (over the top to over the
top)
18. Radio Frequencies.
19. Approach navaids. These are not printed for enroute
waypoints.
20. Runway numbers, slope of runways.
21. Runway QDMs and Overshoot headings.
22. Runway Profiles.
23. Airport Elevation.
24. Transition altitude/level.
25. Solid triangle means reporting point.
26. Make 3 transmissions of 3 seconds duration to switch
the PAPI on.
27. Transition altitude/level.
28. MSA circle for arrival airport. Airport navaid printed
inside circle. Sectors specified by track inbound.
29. Profile required for arrival within 10 DME of
destination.
30. Divert Fuel figure listed for a number of divert ports.
F28-4000 in italics for easy identification.
Flight Planning by
FlightAce®
